Webersys Aquaseal

Webersys-aquaseal | Weber | Saint-Gobain | Deson-Home-Solutions

Packaging
1 L Bottle | 20 L Jerrycan

Webersys aquaseal is a polymer-based sealer designed for protection of natural & synthetic stone. The unique formulation gives excellent water repellent as well as oleophobic i.e. oil-repellent properties. It exhibits high resistance to oil & water stain on the surface treated with weber aqua seal. The treated pores of the surface form an invisible barrier allowing the vapour diffusion due to penetrating effect. It set to form hard-wearing film while maintaining the natural colour of stone & tile.

Ready to mix | UV resistance | Water repellant | Stain resistant | Chemical resistant | Easy to use | Anti bacterial | Good coverage | Wall cladding | Heavy duty applications | Enhances aesthetics | Single component product

Support

Wall, Floor

  • Surface should be clean, dry free of contamination eg, oil, dust, grease, laitance etc
  • New surface need to dry for 48 – 72 hours before application of sealer
  • Excellent surface sealer
  • Protects porous stones
  • Water based product
  • Easy application
  • Internal and external application
  • Highly durable
  • Superior coverage

Tutorials and videos

Here's the Tutorial

Tutorials & Steps

  • Surface should be clean, dry free of contamination eg, oil, dust, grease, laitance etc
  • New surface need to dry for 48- 72 hours before application of sealer
  • Apply evenly weber stoneseal over surface with a paint brush, clean cloth or sponge. Care must be taken not to apply too thick or lumpy coats
  • Allow it to penetrate for 5-1 5 minutes and wipe the surface with dry clean cloth or sponge after application. Any excess material needs to be wiped off
  • Inter coat must be done wet on wet condition before first coat gets fully cured
  • Allow 24 – 48 hours for air cure to develop hydrophobic & oleophobic effects
  • Preliminary testing on small trial area is important to determine the compatibility & possible discoloration of the surface to be treated with weber stoneseal
  • Do not apply on damp or wet surfaces; avoid application during wet weather conditions & on to surfaces that are extremely hot
  • If applied on damp or wet surface, it is likely to peel or get whitened in time
  • Immediately clean tools & hand with water & soap after application