Weberset Plus White

Weberset-Plus-White | Weber | Saint-Gobain | Deson-Home-Solutions

Packaging
20 kg bag

Adhesive for window framing, tile cladding and natural stone flooring

Ready to mix | Self curing | Easy to use | High compressive strength | Good coverage | Tile on tile application | High bond strength | Submerged conditions | Wall cladding | Single component product | Low prorosity tiles | High durability

Support

Wall, Floor

weberset plus-white is a ready to mix, highly polymer modified cementitious adhesive for vitrified, ceramic tile and natural stones of regular size on wall and floor with regular traffic. This product is suitable for fixing granite and other natural stones in window jambs and door frames due to its ability to withstand mechanical operations (which are carried out during fixing doors and windows). White colour adhesive adds to aesthetic look, especially for light colour stones.

  • Ready to mix, single component product.
  • Recommended for both internal & external surfaces for wall & floor in dry & wet areas.
  • Especially suited for fixing low porosity tiles and stones of regular size.
  • Suitable for fixing natural stones in window jambs and door entrances.
  • Highly polymer-modified: Provides high structural adhesion, which allows to be used on a variety of substrates, for fixing a variety of tiles and stones.
  • Excellent adhesion properties, no slip is observed on vertical applications in tiles and natural stones.
  • Self-curing properties, which allows for hassle-free application, with minimum labour.
  • No shrinkage prevents de-bonding and gives longer life to tiles and stones.
  • Low VOC for healthy living.
  • Prolonged and easy workability.
  • The tiled floor can be made available for foot traffic after 24 hours.
  • Can be used for new construction, as well as for renovation over existing floors/facades.
  • No hacking of the substrate required to achieve the bonding.
  • Useful for bed thickness of 3-12 mm, may go up to 15 mm in a limited extent.
  • Do not use on wet screed or plaster. The surface must be fully cured.
  • Use on gypsum plaster or boards, fibre cement boards, or other drywall partitions, strictly in accordance with the tile substrate recommendation table.
  • Can only be used on cementitious waterproofing. Do not use on epoxy or polyurethane waterproofing.
  • Do not use for installing glass tiles or metal tiles. Use only weber bond poxy, for fixing glass and metal tiles.
  • Do not use on metal, rubber, plastics, vinyl, linoleum surface, painted substrates. Contact weber representative for a recommendation.
  • Do not use on surfaces subjected to vibrations. For vibrations, use weberfix drywall for such areas.

Tutorials and videos

Here's the Tutorial

Tutorials & Steps

  • Clean the substrate of oil stains and bond inhibiting compounds, dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal
    absorption.
  • Concrete screeds, renders and block work should be cured sufficiently to avoid with shrinkage cracks.
  • Correct the local undulation/damage on the substrate at least 48 hours
    before the application of Weberset nova.
  • Saturate the surface well and remove excess water before application of Weberset nova.
  • Gradually add Weberset nova (3 parts for white and 2.5 parts for grey) to 1 part of clean water (by volume) and mix it to a lump free, smooth, workable paste using a suitable stirrer / low speed drill mix / or any other appropriate tool.
  • After mixing, allow the mixture to stand for 2 minutes for it to mature.
  • Apply the adhesive onto the substrate covering up to 1 m2 at a time (or no more than can be tiled within 30 minutes). Unfavorable weather conditions (strong sun, dry wind, high temperatures, etc.) or a highly absorbent substrate can reduce the open time, even to just a few minutes. It is therefore necessary that careful checks be made to ensure that a skin does not form on the surface of the spread adhesive. Incase skin formation is observed, re-freshen the adhesive by re-spreading the adhesive with a notched trowel
  • Itis not recommended to wet the adhesive with water once a skin has
    formed, because instead of dissolving the skin, the water will form an
    anti-adhesive film.
  • Apply Weberset nova over the surface using the straight edge of the
    notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness.
  • Double buttering is recommended for heavier stones.
  • If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to evade voids.
  • Ensure adequate gap is kept between subsequent stones/tiles to
    accommodate for thermal expansion and contraction.
  • Clean the stone/tile with water before installation
  • Bed the tiles firmly into the adhesive with a slight sliding and/or twisting
    action/shear, to ensure a good and uniform contact.
  • Itis good practice to lift an occasional tile after fixing, to verify that the
    required contact is being achieved.
  • In wet areas, external areas and all floors, the final adhesive bed should be free from voids.
  • If necessary, tiles should be adjusted, within 30 minutes of installation.
  • Carefully clean off any excess adhesive from the tiles and joints with a
    damp sponge or cloth before it sets. Leave for at least 24 hours before
    grouting.
  • More time may be required before grouting when tiling onto impervious or sealed surfaces or higher bed thickness.