Weberfloor Cementonic
Packaging
300 g Pouch
weberfloor cementonic is a gel-based high-performance additive, for traditional tile-laying method, using a cement slurry over freshly laid screed. It is to be mixed in water which is to be used for making the cement slurry. In addition, weberfloor cementonic can also be used to enhance the strength of the screed as well. Use of weberfloor cementonic greatly reduces the total cost of application, by vastly increasing the coverage of cement slurry, and decreasing the curing time.
Support
Floor
- Add 300 g of weberfloor cementonic in 50 litres of water.
- Mix thoroughly, until there are no paste lumps left.
- Allow the mix to stand for two minutes before using.
- Mix cement and sand in the ratio 1:6, or any other ratio as per industry best practices and create a loose mortar with the weberfloor cementonic fortified water, prepared earlier.
- Easy to use – gel type material, in oeasy to handle pouches allows easy usage, and also prevents wastage.
- Multiple use – can be used to improve performance of cement in any use. Specially use for cement bedding (screed) and cement slurry for laying tiles.
- In depth penetration of cement slurry, modified with weberfloor cementonic, provides strength to overall system.
- Imparts self curing properties to screed and slurry. • Increases cohesive strength of the cement bedding (screed), and also increases the bonding between the tile and screed.
- Greatly increases pot life, ensuring higher speed of tiling and no wastage.
- Imparts adjustability time for tiling done in traditional method.
- Not to be used on the pre-set screed. • Not to be used on wooden, metal or glass substrates.
- Only to be used for floor application.
- Additives for cement slurry are not a substitute for tile adhesives and is to be used only as an undulation, to ensure proper transfer of adhesive to tiles.
- Ensure the bedding is not old or cured and is free from contaminants like debris, dust etc, before using the slurry adhesive.
Weberfloor Cementonic Related Products
- weberfloor slurrybond
Slurry Adhesive For Tilling On Wet Screed : Weberfloor slurrybond is a highly polymer-modified, cementitious adhesive, that can be used in slurry form, on wet screed, for wet-on-wet fixing of tiles and stones, as well as an adhesive paste for fixing tiles and stones on floor and wall. In slurry form, it replaces the cement slurry which has been traditionally used for fixing floor tiles/stones. It also provides additional strength to the screed itself, and increase the tiling speed.
- weberset glass mosaic
Adhesive For Fixing Glass Mosaics: Weberset glass mosaic is a polymer modified cementitious tile adhesive especially for fixing glass mosaic, internal and external floor and wall areas, high bond strength for glass mosaic, low porosity tiles and stones.
- weberset fastfix
Fast Setting Adhesive For Fixing Tiles And Stones: Weberset fastfix is a fast setting, highly polymer modified, high-performance thin-set adhesive, for fixing tiles, stones and mosaics, on a variety of surfaces, for wall and floor application, in internal as well as external area. It is designed for installation of tile & stones for overnight repair, renovation and faster fixing, supplied as a dry mix mortar, to which water needs to be added before application.