weberset premier

weberset premier | Weber | Saint-Gobain | Deson-Home-Solutions

Packaging
20 kg grey bag | 40 kg bag

Adhesive for fixing ceramic tiles, terracotta, and quarry tiles of regular size.

Ready to mix Self curing | Easy to use | High compressive strength | Good coverage | High bond strength | Single component product | High durability

Support

Wall, Floor

Weberset premier is a polymer modified, thin-set tile adhesive for ceramic tiles, in internal areas. It is suitable for both vertical (wall) and horizontal (floor) application, over the cementitious substrate. It is supplied as a dry-mix mortar, to which water needs to be added before application.

  • Can be used in internal areas, for the floor as well as wall application.
  • Low VOC – for healthy living.
  • No hacking of the substrate required to achieve the required bonding.
  • Self-curing properties, which allows for no-hassle application with minimum labour.
  • The free-flowing product makes it easier to mix and apply.
  • No-sag formula: provides for hassle-free application on vertical walls, without any slippage.
  • Very low shrinkage prevents de-bonding and gives longer life to tiles.
  • Useful for bed thickness of 3 – 12 mm. May go up to 15 mm in a limited extent.
  • Do not use for large format tiles.
  • Do not use for fixing vitrified tiles or stones.
  • Do not use on the wet screed. The surface must be fully cured.
  • Do not use for installing glass mosaic, glass tiles, or metal tiles. Use only weberset glass mosaic for fixing glass mosaics, and only weber epoxy adhesive for fixing glass and metal tiles.
  • Do not use for wooden flooring, for insulating and soundproofing panels.
  • Do not use on waterproofing coat – If waterproofing is required, use webertec SBR and webertec crete for the same.
  • Refer to the respective datasheets for details.

*Download Weberset Premier Datasheet Pdf*

Tutorials and videos

Here's the Tutorial

START TUTORIAL

Case studies

Nanded City, Pune
August 2017
Click Here
True Value Homes, Chennai
August 2017
Click Here
Rumah Bali, Pune
August 2017
Click Here

weberset premier Related Products

Assistance

Always feel free to contact us, discuss or get most frequent answers

For more queries : +91 62969 01953 / 8170078060

Email : info@desonhome.com

Call Now
Mail Us

To Get A Free Consultation From Our Expert Please Send Your Phone Number

Engineer Service (*Free)
Gifts Whatsapp Phone-alt Home

Tutorials & Steps

  • Clean the substrate of oil stains and bond inhibiting compounds, dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
  • Ensure that the substrate is flat, stable, well adhered and has a normal
    absorption.
  • Concrete screeds, renders and block work should be cured sufficiently to avoid with shrinkage cracks.
  • Correct the local undulation/damage on the substrate at least 48 hours
    before the application of Weberset nova.
  • Saturate the surface well and remove excess water before application of Weberset nova.
  • Gradually add Weberset nova (3 parts for white and 2.5 parts for grey) to 1 part of clean water (by volume) and mix it to a lump free, smooth, workable paste using a suitable stirrer / low speed drill mix / or any other appropriate tool.
  • After mixing, allow the mixture to stand for 2 minutes for it to mature.
  • Apply the adhesive onto the substrate covering up to 1 m2 at a time (or no more than can be tiled within 30 minutes). Unfavorable weather conditions (strong sun, dry wind, high temperatures, etc.) or a highly absorbent substrate can reduce the open time, even to just a few minutes. It is therefore necessary that careful checks be made to ensure that a skin does not form on the surface of the spread adhesive. Incase skin formation is observed, re-freshen the adhesive by re-spreading the adhesive with a notched trowel
  • Itis not recommended to wet the adhesive with water once a skin has
    formed, because instead of dissolving the skin, the water will form an
    anti-adhesive film.
  • Apply Weberset nova over the surface using the straight edge of the
    notched trowel and then comb the applied adhesive using the notched side of the trowel to achieve the desired thickness.
  • Double buttering is recommended for heavier stones.
  • If the adhesive is buttered to the tile, then ensure proper coverage of the tile surface to evade voids.
  • Ensure adequate gap is kept between subsequent stones/tiles to
    accommodate for thermal expansion and contraction.
  • Clean the stone/tile with water before installation
  • Bed the tiles firmly into the adhesive with a slight sliding and/or twisting
    action/shear, to ensure a good and uniform contact.
  • Itis good practice to lift an occasional tile after fixing, to verify that the
    required contact is being achieved.
  • In wet areas, external areas and all floors, the final adhesive bed should be free from voids.
  • If necessary, tiles should be adjusted, within 30 minutes of installation.
  • Carefully clean off any excess adhesive from the tiles and joints with a
    damp sponge or cloth before it sets. Leave for at least 24 hours before
    grouting.
  • More time may be required before grouting when tiling onto impervious or sealed surfaces or higher bed thickness.